Atari Asteroids - Fully reconditioned, $550.
Tested and working Atari Regulator/Audio and Regulator/Audio II boards, with a 30-day warranty (does not cover damage due to incorrect installation). See our Application Guide to figure out which type you need. We test each one of these under full-load conditions using test equipment originally designed and manufactured by Atari, with some added enhancements of our own. Our testing evaluates all of the voltages as well as the audio channels. "Rebuild" service is available.
| AR -01 (Asteroids) |
Sold out, but we can fix yours! |
| AR -03 (Ast. Deluxe) |
Sold out, but we can fix yours! |
| ARII -01 | Sold out! Use -04 instead! |
| ARII -02 | Sold out, but we can fix yours! |
| ARII -03 | Sold out, but we can fix yours! |
| ARII -04 | $20.00 |
| ARII -05 | $10.00 |
| ARII -06 | $10.00 |
| ARIII, untested | $20.00 - one available |
| Atari color raster transformer assy. | $25.00 - one available |
| Space Invaders boardset with warranty. Includes motherboard and sound board. | $150.00 |
| Space Invaders Deluxe boardset with warranty. Includes motherboard and sound board. | $150.00 |
| Sea Wolf boardset with warranty. Includes mother and daughterboard. | $150.00 |
| Replacement ROM set, Space Invaders (9316 or 2716) | $25.00 |
| Replacement ROM set, Space Invaders (TMS2716) | $27.50 |
| Replacement ROM set, Space Invaders Deluxe (9316 or 2716) | $27.50 |
| Replacement ROM set, Space Invaders Deluxe (TMS2716) | $30.00 |
| Space Invaders/SI Deluxe Multigame Kit (replaces all ROMs) | $25.00 |
| Midway SI/SID Switching Supply Conversion Kit (less P.S.) | $35.00 |
We have a limited assortment of used monitors and parts available. We regret that they are available to walk-in customers only because of the difficulty in shipping these without damage. With few exceptions, monitors listed as "fully working" have cap kits installed and have been adjusted for best picture. No warranty is available, but we'll demonstrate proper operation of them in person at our shop, prior to sale. For a place that doesn't work on monitors, we sure seem to have accumulated a lot of them over the years!
| Model | Condition | Price |
|
Electrohome G07-905 (19" Color) |
Very light Galaga burn-in, fully working |
$60.00 |
|
Electrohome G07-CBO (19" Color) |
Heavy Pac-Man free play mode burn-in, needs flyback |
$25.00 |
|
Electrohome G07-FBO (13" Color) |
No burn-in, fully working |
$75.00 |
|
Wells-Gardner 19K4602 (19" Color) |
Non-working (no vert. defl.), no burn-in |
$30.00 |
| Wells-Gardner 15V2000 (B&W Vector) | NOS picture tube installed (plastic still in place), fully working |
$250.00 |
|
Electrohome G05-801 (19" B&W Vector) |
Working, complete (1 of 2) |
$225.00 |
|
Electrohome G05-801 (19" B&W Vector) |
Untested, complete (2 of 2) |
$200.00 |
|
Electrohome G05-802 (19" B&W Vector) |
Tested, working. No visible burn-in even with power off |
$250.00 |
|
Motorola XM500 (19" B&W Raster) |
Moderate Pong-type burn-in, untested, complete |
$50.00 |
|
Motorola XM701 (23" B&W Raster) |
Untested, complete. Very light Midway Chess burn-in. Will repair upon order at additional cost if requested (1 of 2) |
$125.00 |
|
Motorola XM701 (23" B&W Raster) |
Untested, complete. Very light Midway Chess burn-in. Will repair upon order at additional cost if requested (2 of 2) |
$125.00 |
|
Motorola M7000 (23" B&W Raster) |
Light Boot Hill burn-in, untested, complete. Will repair upon order at additional cost if requested |
$125.00 |
|
19VLBP22 Picture Tube |
Unknown application |
$Free |
|
19VFUP4 Picture Tube |
Unknown application |
$Free |
|
NANAO (Sega) Picture Tube |
Deflection yoke installed |
$Free |
EPROM/PROM Programming Service for EPROMs of type: 2708, 2716, TMS2716, 2732, 2532, 2764, 27128, 27256 and others. We supply the blank part. Price: varies (about $5 each for most EPROMs, more for PROMs).
Atari Asteroids PCB. Fully working, with a 30-day warranty. Suitable for upright or cocktail cabinets. $125
Atari Asteroids Deluxe PCB. Fully working, with a 30-day warranty. Suitable for upright or cocktail cabinets. $145
Atari Baseball PCB. Fully working, with a 30-day warranty. $125
Atari Battlezone/Red Baron Interboard Wiring Harness (new, aftermarket). $10
Atari Breakout PCB. Fully working, with a 30-day warranty. $75 (sorry, currently out of stock)
Atari Centipede PCB. Fully working, with a 30-day warranty. $85
Atari Dig Dug PCB. Fully working, with a 30-day warranty. $100
Atari Gauntlet II PCB. Fully working, sorry no warranty. $125
Atari Gravitar PCB. Fully working, with a 30-day warranty. $125
Atari Liberator PCB. Fully working, with a 30-day warranty. $100
Atari Millipede PCB. Fully working, with a 30-day warranty. Suitable for upright or cocktail cabinets. $150
Atari Space Duel PCB. Fully working, with a 30-day warranty. $125
Atari Tempest PCB Set. Includes Main PCB, Aux PCB and interconnect harness. Fully working, with a 30-day warranty. $175
Atari Tempest Interboard Wiring Harness (new, aftermarket). $12.50
Midway Galaga PCB set. Tested, working with a 30-day warranty. $250
Midway Galaxian PCB. Untested, complete (with daughterboard), no warranty. $45
Midway Space Invaders 2 Wiring Harness (w/ transformer). $45
Midway Ms. Pac Conversion PCB and EPROMs. Converts your standard Pac-Man PCB to a Ms. Pac PCB with no soldering or board modifications required. Plugs into the original CPU socket. These are "vintage" boards, not modern reproductions. Includes the necessary character and maze EPROMs for the main PCB (5E and 5F). $25 (w/o ribbon cable) and $32.50 (w/ new ribbon cable).
Midway Pac-Man PCB. Tested, working with a 30-day warranty. $125
WG6100 Yoke Assembly. Includes wedges, purity ring assy. and clamp. $50
Fluke model 9100s. Enquire for details.
NASA Space Shuttle/Centaur high pressure (4000 psi) titanium spherical helium tanks. Flight hardware manufactured by Martin-Marietta with some documentation available (may be engineering test units). In original shipping containers. Some units still sealed from pre-flight cleaning. Clean ownership records, on something that NASA doesn't typically allow the public to acquire. May not be available for purchase by non-US citizens. The original mission for these tanks involved the launch of a fully-fueled Centaur upper stage rocket after deployment from the Shuttle cargo bay. It was cancelled by NASA after the Challenger disaster because it was considered too risky. I believe these tanks were used to provide the impulse necessary to kick the Centaur rocket out of the Shuttle cargo bay prior to RL-10 engine ignition, but I could be wrong. Examples of these tanks can be seen on display at the Space and Rocket Center in Huntsville, Alabama. Enquire for details.
Updated 3/9/10.
